EM TECH: Gottlieb 2001


I am just going back and finishing off my 2001 rebuild and I have one
issue. I know that I am just missing something so easy but I thought I
would throw it out there for some advice on where to look. The machine
will never get to game over, it just stays on ball 5 forever.. I have
checked the ball count unit (working great) XB relay (super hard to get
too (I have removed bank from the bottom board to check it out) S relay,
TB relay and all the associated switches on the score motor. I have
checked them so many times I am starting to go crazy over this... I
guess it could be a short or maybe I passed a dirty switch and thought I
cleaned it. Any advice? Thanks Chris


--
zeiram
This USENET post sent from http://rgparchive.com

.

Relevant Pages

  • Re: EM TECH: Gottlieb 2001
    ... would throw it out there for some advice on where to look. ... will never get to game over, it just stays on ball 5 forever.. ... too S relay, ... guess it could be a short or maybe I passed a dirty switch and thought I ...
    (rec.games.pinball)
  • Re: EM TECH: Gottlieb 2001
    ... would throw it out there for some advice on where to look. ... will never get to game over, it just stays on ball 5 forever.. ... too S relay, ... Sometimes the rivets get grooves in them from running dry. ...
    (rec.games.pinball)
  • Re: Tech EM Pop A Card Start Up
    ... >> When yo uhit the reset bar manually, what relay is making it stop? ... > Ok....you can tell when a switch is normally open or normally closed by ... > should be once the game is powered up and ready to play, ... > terming the ball count step down coil. ...
    (rec.games.pinball)
  • Re: old chicago keeps skipping players
    ... Out bonus score relay energizes & bonus pts awarded. ... switch 3A should fire the Ball Count Unit Step-Up ... causing the EOS switch to energize the Player Reset Relay. ...
    (rec.games.pinball)
  • Re: old chicago keeps skipping players
    ... I did not hook jumper from Orange-White wire to Gray on Coil. ... Is that the Ball count step up does not fire & player reset does not ... Then Outhole relay Re-energizes, ...
    (rec.games.pinball)