Re: Scored an HUO Centigrade 37!
- From: Vic Camp <campgames@xxxxxxxxx>
- Date: Sat, 28 Nov 2009 05:57:02 -0800 (PST)
On Nov 28, 12:28 am, Ace 24 <ebner...@xxxxxxxxx> wrote:
I just brought home an HUO C37 with 4677 plays on it!
It is serial#5512. What number did the 1600 production run start on?
It has some scratches on the cabinet sides (a gouge on one side) but
is otherwise almost like new! It doesn't even need new leg levelers!
It has the envelope with manual, 2 game schematics, coin door
schematic, Gottlieb white lube, 11 score level cards, extra
instruction card, notice about playfield cleaning, notice that says
that any damage is the fault of the shipper, Gottlieb return postcard
- the works.
The coin plate doesn't have plastic coin slots. It has metal plates
covering up the holes.
I don't think there is any wear from ball drop out of the kick-out
hole. If I replace the ball every few years and wax every 2 months,
will it always be OK there? Or should I put down a little mylar (or
Pinball Pal) patch as a preventative?
I also don't think there is any wear around the pops. But I'll know
for sure when I get into it.
I suppose I'll put down adhesive mylar (or the Pinball Pal stuff) like
I always do but I'm almost reluctant to stick anything on such a nice
Some of you seal a good backglass as a preventative. I don't plan to.
One of a Kind condition for sure.Just a breathtaking Gottlieb EM wedge
- Prev by Date: QS regarding Twilight Zone mod
- Next by Date: Re: CV Eddy Sensor doesn't register fast shots(and opinion on replacements wanted)
- Previous by thread: Re: Scored an HUO Centigrade 37!
- Next by thread: Re: Scored an HUO Centigrade 37!