Re: Stern Mpu - Tech / Repair Service
- From: VectorSRV8 <shawn@xxxxxxxxxxxxxxxxx>
- Date: Mon, 26 Oct 2009 22:35:52 -0400
I could take a shot at it depending on the damage. Probably needs the reset section and a few chip sockets. I have the PIA's in stock too. Let me know.
The CNY PIN GUY wrote:
Hey All.
working on an older SS Stern
and I have a feeling the battery leaked too much and messed up the
reset circuit
also its missing 1 display digit on all displays so U10 or U11 are
possibly in need of replacment PIA 6820 GPE is out of stock right now
I did cut the battery off and added a fresh battery holder per clays
guide with the diode on the pack
I cleaned the board trying to neutralize the damage but not sure it it
did much
LED doesnt lite up , but never did since I owned it
the game worked great NOW will not even boot , I swapped out Solenoid/
Voltage Regulators and still wont boot.
Does anyone repair these boards at a low cost ? or anyone able to test
this MPU to see if it indeed does work
PM if you know someone for the repar - Its not horrible at all and can
send pics prior to sending the board out for service
Thanks
James
- References:
- Stern Mpu - Tech / Repair Service
- From: The CNY PIN GUY
- Stern Mpu - Tech / Repair Service
- Prev by Date: Re: LOTR on location in N.J.
- Next by Date: Re: Anyone near Atlanta know how to drill a PF for me?
- Previous by thread: Stern Mpu - Tech / Repair Service
- Next by thread: cv in boston just put up on ebay
- Index(es):
Relevant Pages
|
