Re: Resistor ID help please

Toolguy <rochestersheep@xxxxxxxxxxxxx> wrote in news:63cc5ab4-b544-4103-
9264-9f9ad1bbf128@xxxxxxxxxxxxxxxxxxxxxxxxxxxx:

Thanks guys, but I still can't determine the wattage, even with the
chart above.

Wattage isn't shown on the color bands, but just infered from the size of
the resistor. Or specified when you order them, of course.

--
Have a home video that's trapped on your camera? Want to share it on the
web or on DVD?

http://www.webwidevideo.com/
.

Relevant Pages

  • Resistor ID help please
    ... but did not see a chart. ... The color bands on the resistor are: GOLD, BLK, BRW, BRW. ...
    (rec.games.pinball)
  • Re: 1 ohm cathode resistors?
    ... There is no need for high wattage resistors. ... wattage resistor would burn up. ... And of course you would always afford some room in the wattage spec, ... You won't need bypass caps, especially for a 1 ohm resistor. ...
    (alt.guitar.amps)
  • Re: LEDs
    ... LEDs get more conductive as their ... Sounds to me like 3.2V is typically across each resistor, ... be 3.2V*.02A which is close to 1/10 watt. ... Resistor reliability is best when wattage ...
    (sci.electronics.basics)
  • Re: More on CHT probe replacement
    ... required size of a resistor. ... > Wattage is a little like a wooden deck. ... This 82 ohm resistor will then be dissipating ...
    (rec.aviation.owning)
  • Re: Need Whirlwind Resistor
    ... the rear playfield "lightning board" to the special solenoid/sound ... but the R44 resistor on the board is burned to a crisp. ... They were used for a reason. ... see chart". ...
    (rec.games.pinball)