Banzai Run cabinet head graphics

Here is a picture of the cut to fit head graphic. Primer, sand, more
sand, wet sand, 6 coats of black lacquer and 6 coats of clear to match
the mylar decal gloss. Cut off all but a 1/4" of the border to fit as
best that I could. To move it foward I'd have been off the radius with
the gold section. If I'd trim the gold section to match the radius
better then I'd lose the black border. Did the edge of the decal with
a black marker before applying to get rid of the white vinyl line. I'm
working on the other side now.
http://s178.photobucket.com/albums/w278/Jansv/pin%20pictures/?action=view&current=MVC-001X.jpg&evt=user_media_share
.

Relevant Pages

  • Re: Varathane Diamond Gloss Polyeurethane - How many coats?
    ... Have a look at my Pinbot resto page. ... Sand the third and fourth if needed and only do it wet. ... When done you should have about 6 coats sprayed at most. ... Basically let cure till you can't smell the chemicals anymore, about a week or two depending on temps before you stat repopulating. ...
    (rec.games.pinball)
  • Re: Suggestions for red oak finish
    ... sealer, it is best to get the yellow can of Zinseer marked "sanding ... You can actually sand and recoat when the shellac will easily sand ... the more coats on the surface and the thicker finish you ...
    (rec.woodworking)
  • Re: Paint
    ... I plan to paint with aerosol cans. ... Metallic does *not* mean you cannot sand. ... coats, ...
    (alt.guitar)
  • Re: Varathane Diamond Gloss Polyeurethane - How many coats?
    ... How many coats should I spray? ... Do I sand between the first and 2nd coat? ... Sand the playfield as flat as possible with the ... Search for Arizona Bruce's clearcoat guide and read clay's guide too, ...
    (rec.games.pinball)
  • Re: Painting pickguard
    ... Sand for a key. ... Primer (couple of coats). ... Lacquer. ... If you want a solid color I would just buy a new pick guard. ...
    (alt.guitar)
Loading