Re: Locked on coil F-14 Tomcat

Remove J118 from the upper right of the CPU and power on to confirm it's not
a switch issue. Though if it's coming on right away on power up, then it's
going to be a drive side board issue.

Q75 is the drive for the left sling. Though if you're having trouble
detirmining what transistor is the problem, I'd probably recommend having
someone with experience with board work replace it if you.

--
Rob Anthony
borygard at gmail dot com
Pinball Classics
www.LockWhenLit.com
Quality Board Repair - In Home Service
314-766-4587



"em pinball" <brshsg@xxxxxxxxx> wrote in message
news:0022588f-0b2e-4d7d-940e-7c6c4b953316@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
On Nov 22, 4:23 pm, "Lloyd Olson" <l...@xxxxxxxxxxxxxxx> wrote:
Transistor that drives it failed. I'd check that first. LTG :)

"em pinball" <brs...@xxxxxxxxx> wrote in message

news:b555a656-867f-451d-a988-1e98fc89e951@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx



I just turned my f-14 on and played some games on it. i just happened
to notice the lower left slingshot was locked on. i shut it off and
when i power it up it locks on . i removed the rubbers and checked the
two switches. didnt see anything that jumped out at me. can someone
give me a direction to look at. thanks for any help. norm- Hide quoted
text -

- Show quoted text -

would you know where that transistor is located. thanks norm


.

Relevant Pages

  • Re: Newbie question: circuit for harddrive indicator
    ... >will be activated by a transistor that is triggered off of the computer ... >need to power it off of a molex connector from the power supply (5v or ... What if you used a light sensor, say a phototransistor, that would be ... acts sort of like a switch, when the light is on it the switch is ...
    (sci.electronics.basics)
  • Re: Bridgeport boss 4 Spindle not powering up (continued)
    ... you need to reset a safety interlock on the motor switch pod ... I can work my way through the average power ... activate the spindle all he would get would be a buzzing sound. ... each for a different axis stepper motor drive). ...
    (rec.crafts.metalworking)
  • Re: PC doesnt start
    ... With the switch pressed the voltage are within the specs but, ... I measured the voltage at the Power switch plug, when connected to the MoBo, ... Why then would a power switch or connections be ...
    (microsoft.public.windowsxp.hardware)
  • Re: Gorgar Solenoid Always on
    ... power switch is turned on. ... I checked the other hotwire connected to the solenoid and the problem ... Sounds like the "typical" blown transistor. ...
    (rec.games.pinball)
  • Re: Protecting the system
    ... Two notices, one "press briefly to shut down" pointing at the power button, ... the plug or, if it has a switch, the PSU. ... minimise writes to the flash device which ext3 would be constantly doing ... The other thing I need to store is the system configuration files - ...
    (uk.comp.os.linux)