Re: OFF TOPIC BUT PLEASE A LITTLE OUT RUN TURBO HELP

On Oct 31, 11:59 pm, Cliffy <crin...@xxxxxxxxxxx> wrote:
blbar...@xxxxxxxxxx wrote:
I have a out run turbo. I hear sound but there is no picture. I think
that the suicide battery is okay, but something else is wrong with the
board or maybe the monitor. Anyone out there fix boards?

Hi Ben- No, your FD1094 is still good, so far. When it dies you get no
sound and static colors on the screen. More likely you have a monitor
power problem. Does the neck heater glow orange? Can you hear the
typical monitor squeal on power up and the static electricity crackle?
If so the monitor is probably ok but you have lost the synch signal. The
harness going from the game boards to the monitor chassis carries the
synch signal as well as the RGB, red, green, blue and ground. Check that
first. If no hiss, crackle or squeal or neck glow then you have a
monitor power problem and it could be a blown fuse on the chassis or
simply an unplugged cable. If the on board fuse is blown you likely have
a shorted HOT, horizontal output transistor. If thats the case you need
to go over the whole chassis or buy a new monitor. Hope that helps!

--
Cliffy - CARGPB2
Home of the world's finest pinball protectorshttp://www.passionforpinball..com

................................................................
        Posted via TITANnews - Uncensored Newsgroups Access
                  >>>> athttp://www.TitanNews.com<<<<
-=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-

Thanks, I just bought a capacitor kit for the monitor board, and
hopefully it might solve my problem, otherwise??
.

Relevant Pages

  • Re: Robotron WG Monitor Help!!!--Please
    ... and people are worried about touching an unplugged monitor... ... the monitor is on is a good way to die... ... monitor and chassis My problem is with the top ... The 3 thin color bar lines remain on ...
    (rec.games.video.arcade.collecting)
  • Re: TECH: WG19K7901 shorting to ground
    ... disconnect the ground from the cab to the monitor. ... sparks from the left hold down screw on the chassis to the metal base ... plate which holds the chassis to the monitor assembly. ... surprised if the logic board doesn't have problems as a result. ...
    (rec.games.video.arcade.collecting)
  • Re: Question re: WG 19K7901 monitor
    ... Well I finally got up the nerve to pull the monitor and discharge it ... I looked at the chassis but nothing was noticebly wrong (at least to my ... doesn't appear to be any breaks in the power lines. ... pressure to this part of the chassis. ...
    (rec.games.video.arcade)
  • Robotron WG Monitor Help!!!--Please
    ... The 3 thin color bar lines remain on ... I was getting a shock from the horizontal out transistor on the ... If I tapped on the monitor ... chassis frame the problem would usually clear up. ...
    (rec.games.video.arcade.collecting)
  • Re: WG K7000 Monitor Chassis Replacement - Anyone ever try one of these??
    ... a cabinet with a k7000 19" monitor but no chassis. ... Took awhile to get the picture to come up though. ... The new chassis has much better colors but I'm ...
    (rec.games.video.arcade.collecting)
Loading