TECH: LW3 Need pics & assembly for gun handle

I have a lethal weapon 3 that was SO RAPED..missing a TON of stuff!!
Long story short is I got the game running after buying dead boards &
such, but my last problem is the gun. the switch assembly that goes
inside the cab (the switch that gets activated when you squeeze the
trigger) is totally missing, all I have is a molex connector where it
would hook into inside the cabinet. Now if I let the ball drain
quickly, it says "freeze" & the ball shooter puts the back ball into
play (letting me know my PPB board is working & the ball kicker &
launcher coil is working (all missing when I got the game).

Here is my problem: if I jump the two wires coming into the molex
connector, the coil doesent fire the ball and my sound goes out...like
im getting some short. tested the wiring to the switch matrix, tested
everything else in that switch row & column, yet I seem to have a
short OR im missing something thats on the assembly with the switch
that im missing.....can anyone take a picture of their gun assembly
from inside the cab? OR someone have this part to sell me? I am
starting to think maybe its one of the 4011's on my switch
matrix...but before I do that I at least want to see what the assembly
im missing looks like & see if I can simulate one & see if the gun
fires on cue.....

ANY help you can offer me is much appreciated & thanks!!!

Greg
.

Relevant Pages

  • Re: TechHelp: Data East Secret Service
    ... When the game sees there is a ball missing, the display reads "ball ... Sounds likely to be a trough switch though. ...
    (rec.games.pinball)
  • Re: TECH: Flash Gordon Tilt Mechanism
    ... I have something missing from mine. ... The ball goes into the raceway and if you lift the machine up it travels to the end hitting the switch and completing the tilt circuit. ...
    (rec.games.pinball)
  • Recel lady luck again
    ... I seem to have got my lady luck pin working pretty well (minus the sounds and one relay that i'm missing, but someone is looking for them for me) ... it is true that 99% or problems on EM pins are dirty switch contacts, i'd cleaned every contact i could get at with a points file ... it moves on to the next ball almost every time ...
    (rec.games.pinball)
  • Re: Got the Cyclone!
    ... Broken Mystery wheel is pretty common -- you can try fixing it by ... rebuilding the missing section and finding a pin to hold it in place -- ... switch entirely which was giving me fits. ... the ball is kicked out immediately. ...
    (rec.games.pinball)
  • Re: System 80--stumped--->solved :-)
    ... the game in question is Spirit. ... you are supposed to get three ball multiball. ... switch, or open the slam switch, all three balls are appropriately ejected ... I swap in a different, known good driver board, thinking maybe the driver board in the game has a bad component. ...
    (rec.games.pinball)