Re: FH shop out guide
- From: WNUTS@xxxxxxxxxxx
- Date: Thu, 30 Oct 2008 16:26:54 -0700 (PDT)
On Oct 30, 5:48 pm, JDubbbs <jdub...@xxxxxxxxx> wrote:
Ay Guys
Getting ready to start a pf swap for my fh and am looking for a
guide, any suggestions ? Its only pinball site is a dead link to the
guide.
TIA
John
jdubbbs
Never knew of a guide. Iv'e done a few PF swaps and always took lots
of pictures. Layer by layer as the parts come off photograph it. You
can't have too many pictures. On the underside I use a fine tip marker
and label the playfield as to what assembly was there. You can go
around the assembly before removing it to outline its position. I use
the marker on each connector so they don't get mixed up. I also label
the playfield as to where the assembly connectors came through from
the top. On the assemblies that don't have plugs I leave a bit of
snipped wire still attached to help identify when I solder them back
on. I use solder wick as traces for the underside and a staple gun to
anchor it.
.
- References:
- FH shop out guide
- From: JDubbbs
- FH shop out guide
- Prev by Date: Re: FA: Gottlieb Big Indian
- Next by Date: Re: New Seawitch Backglass Video & Picture of what it looks like lit up.
- Previous by thread: FH shop out guide
- Next by thread: Re: FH shop out guide
- Index(es):
Relevant Pages
|
