Re: TECH: Ramp flap on RFM

From: "a.stebel" <kstebel@xxxxxxxxxx>
Date: Wed, 24 Sep 2008 17:01:36 -0700 (PDT)

On Sep 24, 5:35 pm, chuck <ch...@xxxxxxxxxxx> wrote:

I've been having a hell of a time keeping the ramp assembly from
sticking up. I rebuilt the assembly and used a new coil sleeve. It's
very smooth when it moves. I've tried adjusting the whole angle of
the assembly, but every so often it sticks in the up position (coil
not energized.) Has anyone had this problem and figured out a good
fix?

Mine had this problem. It turned out to be the roll pin on the
solenoid plunger was sticking out ever so slightly. Small filing job
and it was perfect after that.

a.stebel
.

References:
- TECH: Ramp flap on RFM
  - From: chuck

Prev by Date: Re: Slow blow fuse vs no slow burn fuse
Next by Date: Also OT: Anybody here a fan of Tom (Twp1) and I?
Previous by thread: Re: TECH: Ramp flap on RFM
Next by thread: WTB Dirty Harry plastic
Index(es):
- Date
- Thread

Relevant Pages

Re: TECH: Ramp flap on RFM
... I rebuilt the assembly and used a new coil sleeve. ... Do you have the factory plastic ramp flap? ... metal repro ramp flaps and I never had a problem w/ it sticking up ...
(rec.games.pinball)
Re: tech- intermittent up flipper on TAF
... dragging in the coil sleeve, or the flipper button points are sticking ... Flipper mechs seem to be moving freely. ...
(rec.games.pinball)
Re: LOTR Barad-Dur Tower
... tower is sticking. ... I'm assuming you checked the coil sleeve for dirt buildup and / or ...
(rec.games.pinball)
TECH: Ramp flap on RFM
... I've been having a hell of a time keeping the ramp assembly from ... sticking up. ... I rebuilt the assembly and used a new coil sleeve. ...
(rec.games.pinball)
Re: TECH: Ramp flap on RFM
... I rebuilt the assembly and used a new coil sleeve. ... I've tried adjusting the whole angle of ... might be able to decrease the chances of the flap sticking if you add ...
(rec.games.pinball)