Re: Tech: HELP PLEASE! Gottlieb Big Indian flipper probs



Fact #1: Non standard - Yellow dot - coils
Fact #2: Problem is worse on high tap.

My suggestion is to look for horses, not zebras. (transformers and the
like)

I had a similar problem on Big Brave - It got worse with yellow dot.
This would be consistent with the high tap as well, I believe.


I think the discussion on that one was that the "hold" part of the
coil is no stronger than standard, but the flipper bat is coming to
the end of stroke faster and the weak part of the coil can't hold it
back.


Two suggestions:
1. Try standard strength coils.
2. Wait for a month or two and the flippers will not be as strong and
the bounce will stop - like it did with mine.

Good luck!!

.



Relevant Pages

  • Re: How to drive DC cctv lens iris?
    ... iris of a cctv lens? ... These things have two coils, ... (standard 4 pin connector), and I guess there must be a standard but I ... Pelco also makes camera controllers ...
    (sci.electronics.design)
  • Re: How many coil sleeves on a Pinbot?
    ... eject holes (standard 03-7066) ... If I missed any coils just add those in. ... It doesn't hurt to have a stock of standard and flipper coil sleeves laying around. ... Best thing you can do to get your coils performing snappier is to replace the coil sleeves. ...
    (rec.games.pinball)
  • Re: How to drive DC cctv lens iris?
    ... These things have two coils, ... (standard 4 pin connector), and I guess there must be a standard but I ... Need to learn how to apply control theory in your embedded system? ... "Applied Control Theory for Embedded Systems" by Tim Wescott ...
    (sci.electronics.design)
  • Re: How to drive DC cctv lens iris?
    ... These things have two coils, ... Voltage/current for both is normally supplied by the camera ... (standard 4 pin connector), and I guess there must be a standard but I ...
    (sci.electronics.design)
  • Re: WTB: GTB A-5141 Flipper Coils
    ... but looking to save some coin. ... I do have a pair of yellow dot A-5141 coils I could trade for them if ...
    (rec.games.pinball)