Re: Tech: MM Color Changing LEDs with PinLED WPC-95 driver board

On May 31, 12:52 pm, "Jim Lindsay" <DIES...@xxxxxxxxxx> wrote:
     These LEDs are also lighting up when the lights one to the right and
one left of them in the lamp matrix light up. This MM also has the PinLED
WPC-95 driver board. This happens in game play and single lamp test. Is
there a way to make these light up only when they should? They are a very
nice feature but they screw with your game play when they come on at the
wrong times. When I install the normal bulbs the game works properly. I have
tried these LED in other positions and the same thing happens.  Has anyone
else seen this or know of a fix?

Medieval Madness Color Changing LEDs (Set/2)http://bayareaamusements.com/Merchant2/merchant.mvc?Screen=PROD&Produ...

I inquired at Bay Area Amusements and received the reply:
     Don't know why that would be happening unless some diodes are not
connected where they are supposed to be in the circuit, etc. The driver
board is electrically the same, and we've not heard from anyone else about
any phantom lighting. You can return the color changing kit if you wish.

Jim

My game did this when I put a Pinled board on it. Take the screw out
of the bottom right hand mounting screw and put a piece of cardboard
between the mounting screw and the board and it will stop.
.

Relevant Pages