Re: Sys11 Display voltage

You should have installed ALL the pieces as the other
pieces not replaced were probably stressed.

That's likely the reason for your problems.

Never replace single pieces in this section of the power
supply if you've had a failure. (The 'guide' must be wrong....)

--
Fred
TX
CARGPB#8
******************

"mosten" <mosten@xxxxxxxxx> wrote in message news:4c3db499-53fa-4907-b724-2214e2493804@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

On May 6, 9:29 pm, "John Wart, jr" <johnwar...@xxxxxxxxxxxxxx> wrote:


Well, following clay's guide I was trying to replace the above first.
I went ahead after I posted and put in the new MJE15030, now it blows
the 1/8 amp fuse on power on.


.

Relevant Pages

  • Re: Compile boinc for amd64
    ... possible to increase the power of boinc? ... there is some guide and so on that you can suggest me? ... Any particular reason why you want to compile it yourself rather than ...
    (Debian-User)
  • Re: Sys11 Display voltage
    ... Prior I had +49v and -0v where I should have had +100v and ... following clay's guide I was trying to replace the above first. ... the 1/8 amp fuse on power on. ...
    (rec.games.pinball)
  • Re: Gottlieb Bridge Rectifier Issues?
    ... voltage measurements are the only true measurement. ... this could only be a power on measurement. ... This is all in the guide. ...
    (rec.games.pinball)
  • Re: Solar powered lasers in space
    ... clever programming the gee forces slide linearly from your start to ... Now, lets look at the power levels needed to achieve that, and the ... The power level to produce 1 kgf is ... for the simple reason that space will not solve the problems and could ...
    (sci.space.policy)
  • Re: Solar powered lasers in space
    ... Now, lets look at the power levels needed to achieve that, and the ... energy accurately directed at a thrust structure. ... The power level to produce 1 kgf is ... production - the US finds reason to institute regime change in these ...
    (sci.space.policy)