Re: tech: WH20 big foot motor wires came off

On Apr 2, 6:50 pm, appetite4pinball <mgsiev...@xxxxxxxxx> wrote:
In the process of shopping out my WH20; the yellow and red wires that
attach to the big foot motor managed to come loose and i'm not sure
which wire goes to which lug of the motor now?  Anybody have a pic of
this of the underside of the upper playfield, or a WH20 that is
disassembled that could check this out so that i can solder these back
on correctly?  thank you!
Mike

Red is closest to the pins in the board.
Email me for pic.

Eric
.

Relevant Pages

  • Re: tech: WH20 big foot motor wires came off
    ... attach to the big foot motor managed to come loose and i'm not sure ... which wire goes to which lug of the motor now? ...
    (rec.games.pinball)
  • Re: tech: WH20 big foot motor wires came off
    ... attach to the big foot motor managed to come loose and i'm not sure ... which wire goes to which lug of the motor now? ... this of the underside of the upper playfield, ...
    (rec.games.pinball)
  • Re: tech: WH20 big foot motor wires came off
    ... attach to the big foot motor managed to come loose and i'm not sure ... which wire goes to which lug of the motor now? ... this of the underside of the upper playfield, ...
    (rec.games.pinball)
  • Re: Strange how-to question(s)
    ... vintage radio I suspect that this will be a normal ... lug is the volume control input to the power amp. ... DPDT switch to switch that top lug ... between the orignal wire or the headphone output. ...
    (sci.electronics.basics)
  • Re: I want to wire a new line to my bathroom
    ... > I would attach the 15 AMP breaker to the panel right under two 15 AMP ... > fasten it the box at the wire hole. ...
    (alt.home.repair)