Re: Connector Pins (PLEASE HELP!)

As others have already said, Radio Shack does not sell crimpers - heck, I
don't think they even sell *radios*! If you post your location, perhaps
someone local can loan you the tools.

Joseph "Tony" Dziedzic

In article
<6f45aed9-a7a0-48ce-a4f4-0ae3ecb5f831@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>,
lkallus@xxxxxxxxxxx wrote:
Hello,


Does anyone know what pins and crimper I should buy from Radio Shack?
I will not be using it but maybe this one time.

I have a 1979 Bally and need to replace a few of the pins on the
connector J4 going to the MPU.

Any suggestions.

Thank you
.

Relevant Pages

  • Re: Orbitsonic 200; Microphone Wiring Question
    ... The microphone plug on the front is a 5-pin DIN-type connection. ... I see Radio Shack ... make 5 pin din plug mics - and not always compatible wiring. ... use a VOM - one lead to the chassis of the set - and ohm out the mic pins. ...
    (sci.electronics.repair)
  • Re: WD External hard disk failure...
    ... >Other kits from Radio Shack have symmetric ... >pins, which causes the center conductor of the Adaptaplug to ...
    (sci.electronics.components)
  • Re: Connector Pins (PLEASE HELP!)
    ... Does anyone know what pins and crimper I should buy from Radio Shack? ... Order from great plains electronics. ...
    (rec.games.pinball)
  • Connector Pins (PLEASE HELP!)
    ... Does anyone know what pins and crimper I should buy from Radio Shack? ... connector J4 going to the MPU. ...
    (rec.games.pinball)