Re: Connector Pins (PLEASE HELP!)

lkallus@xxxxxxxxxxx wrote:
Hello,


Does anyone know what pins and crimper I should buy from Radio Shack?
I will not be using it but maybe this one time.

I have a 1979 Bally and need to replace a few of the pins on the
connector J4 going to the MPU.

Any suggestions.

Thank you

They do not sell the proper pins or crimper at radioshack. Order from great plains electronics.

-scott CARGPB#29
.

Relevant Pages

  • Re: .1 Crimps are my new Hell...
    ... I'm a CARGPB and I own *4* sets of those, 1 for each size terminal I've needed to replace in pins. ... Doesn't mean you may not be able to get a sufficient crimp with cheaper crimpers, ... If I only used them occasionally, I'd consider going back to the Radio Shack crimper I used before that was a real POS. ...
    (rec.games.pinball)
  • Connector Pins (PLEASE HELP!)
    ... Does anyone know what pins and crimper I should buy from Radio Shack? ... connector J4 going to the MPU. ...
    (rec.games.pinball)
  • Re: Orbitsonic 200; Microphone Wiring Question
    ... The microphone plug on the front is a 5-pin DIN-type connection. ... I see Radio Shack ... make 5 pin din plug mics - and not always compatible wiring. ... use a VOM - one lead to the chassis of the set - and ohm out the mic pins. ...
    (sci.electronics.repair)
  • Re: WD External hard disk failure...
    ... >Other kits from Radio Shack have symmetric ... >pins, which causes the center conductor of the Adaptaplug to ...
    (sci.electronics.components)
  • Re: Connector Pins (PLEASE HELP!)
    ... As others have already said, Radio Shack does not sell crimpers - heck, I ... Does anyone know what pins and crimper I should buy from Radio Shack? ...
    (rec.games.pinball)