Connector Pins (PLEASE HELP!)

Hello,


Does anyone know what pins and crimper I should buy from Radio Shack?
I will not be using it but maybe this one time.

I have a 1979 Bally and need to replace a few of the pins on the
connector J4 going to the MPU.

Any suggestions.

Thank you
.

Relevant Pages

  • Re: Orbitsonic 200; Microphone Wiring Question
    ... The microphone plug on the front is a 5-pin DIN-type connection. ... I see Radio Shack ... make 5 pin din plug mics - and not always compatible wiring. ... use a VOM - one lead to the chassis of the set - and ohm out the mic pins. ...
    (sci.electronics.repair)
  • Re: WD External hard disk failure...
    ... >Other kits from Radio Shack have symmetric ... >pins, which causes the center conductor of the Adaptaplug to ...
    (sci.electronics.components)
  • Re: Connector Pins (PLEASE HELP!)
    ... As others have already said, Radio Shack does not sell crimpers - heck, I ... Does anyone know what pins and crimper I should buy from Radio Shack? ...
    (rec.games.pinball)
  • Re: Connector Pins (PLEASE HELP!)
    ... Does anyone know what pins and crimper I should buy from Radio Shack? ... Order from great plains electronics. ...
    (rec.games.pinball)
  • Re: Gottlieb System 1 Pinball Pool help (n00b questions)
    ... pretty obvious to me that the MPU was not happy. ... connectors etc just to be on the safe side. ... Thinking I was in the home stretch I opened the coin box and attempted ... Any time I try to short the pins mentioned ...
    (rec.games.pinball)