Re: GETAWAY switch help needed !
- From: "Lloyd Olson" <ltg@xxxxxxxxxxxxxxx>
- Date: Thu, 31 Jan 2008 14:54:13 -0600
Look at your other micro switches - same way. Two lugs close together on
one end and one lug farther away at the other end. The two close together -
outside one gets white wire ( and what ever color stripe ) and black end of
diode, middle lug gets green wire ( and what ever color stripe ) far lug by
itself gets the silver banded end of diode. LTG :)
"Craig A." <craiganstett@xxxxxxxxx> wrote in message
news:e29c4475-5f14-40c8-b672-6bb5f7bd6b59@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Which way should the diode be mounted on the up/down ramp switch? And
mounted to which inputs?
I thought one side was supposed to be mounted to the "NC" prong but on
my replacement switch from Marcos there is no "NC" prong.
Help?
.
- References:
- GETAWAY switch help needed !
- From: Craig A.
- GETAWAY switch help needed !
- Prev by Date: Re: Anyone lucky enough to have a pin in their workplace ?
- Next by Date: SOT: Ebay seller rating system
- Previous by thread: GETAWAY switch help needed !
- Next by thread: Whirlwind Custom Cards
- Index(es):
Relevant Pages
|
