Re: Gorgar boot up problem

spikeynick <spikeynick@xxxxxxxxx> wrote in news:1193856942.317671.63160
@k35g2000prh.googlegroups.com:

I recently got a Gorgar pinball machine (Williams,1979,sys6) this is
my first pinball machine. When I turn it on the light bulbs turn on,
but that's it. the score/credit displays are blank and I can't get it
to do anything. Any ideas on where to start troubleshooting this
issue?

Thanks,
Nick


Sounds like every pin I've purchased :)

Here's where you need to start -

http://www.pinrepair.com/sys37/

read this - and follow it through step by step. If you don't have a volt-
ohm meter, get one (make sure it has a diode setting).

What you are describing could be a host of things.

For any Sys6, always replace the interconnect between the mpu and the
driver board (even if it looks ok, because it usually isn't).


--
Looking for TriZone, Firepower & Sharpshooter backglasses in good shape.
.