Re: Gottlieb Wipe Out flash lamps not working
- From: "John" <cen_tex.forsa_le@xxxxxxxxxxx>
- Date: Fri, 26 Oct 2007 21:45:48 -0500
Yes, you are right. After reading the schematics and look at the playfield
I think I have found my problem. There are 3 resistor circuits that control
the flash lamps. A set of 6 resistors on a PCB that controls the lamps
(44s) in the bop bumpers. I reflowed the solder joints and rebuilt a couple
traces and that cicuit works fine now. A single resistor in the backbox
insert controls 6 flash bulbs (67s) in the backbox. This works fine.
Another single resistor (R1) under the playfield is wired to the 6 flash
lamps on the playfield. The DMM shows this as open so I have found my bad
resistor! I'll pick one up at Frys tomorrow and I shoudl be good to go.
These schematics are starting to make sense :)
Thanks for your help,
John
.
- References:
- Tech: Gottlieb Wipe Out flash lamps not working
- From: John
- Re: Gottlieb Wipe Out flash lamps not working
- From: Reinhard
- Tech: Gottlieb Wipe Out flash lamps not working
- Prev by Date: Re: Expo: Worth admission for four hours?
- Next by Date: Re: Expo: Worth admission for four hours?
- Previous by thread: Re: Gottlieb Wipe Out flash lamps not working
- Next by thread: WTB: Junkyard in N. Cal or Oregon
- Index(es):
Relevant Pages
|
