Re: More TZ resets
- From: cameronj@xxxxxxxxxxxxxx
- Date: Sun, 26 Aug 2007 16:18:27 -0700
OK I had some reset problems when I first got my TZ too. The biggest
problem was low voltage coming from the wall. Due to the location and
the particular circuit, voltage would dip just enough when there was a
draw such as lots of flipper action in a brief time. There was a low
voltage setting in the firmware and Ray from Action Pinball gave me a
jumper that fixed the problem until I was able to get a better circuit
to the machine.
Hope this helps.
.
- References:
- More TZ resets
- From: Jeffrey Ross
- Re: More TZ resets
- From: John Wart, jr
- More TZ resets
- Prev by Date: FS: KISS Pinball machine
- Next by Date: Re: Magic Eraser questions (and a buying tip)
- Previous by thread: Re: More TZ resets
- Next by thread: Re: More TZ resets
- Index(es):
Relevant Pages
|
