Prism board not found??

I have been struggling with a RFM for about 6 months or so now and still
can't get it to boot. I have replaced the mother board with a new one,
replaced the power supply, and just had the prism card repaired. It was
totaly dead to start with so I replaced the motherboard and cpu with NOS
one. I got the error message no boot device detected. I tried doing the
update and that did nothing. Then I got a pub card and that does nothing.
When the Pub card is installed I get the color patern and a "please wait"
message, then after a few seconds I get the Message "prism board not found"
Does anybody have any clue what might be going on here? At this point I am
totaly stumpped and don't know what to do. Please help.

Thanks
Brian


.

Relevant Pages

  • Re: Prism board not found??
    ... I have replaced the mother board with a new one, ... totaly dead to start with so I replaced the motherboard and cpu with NOS ... I got the error message no boot device detected. ... Then I got a pub card and that does nothing. ...
    (rec.games.pinball)
  • Re: Black screen on boot
    ... A bad memory, a bad video card, a bad motherboard, a bad PCI card can all cause the computer not to ... power supply works and the 12 volt bus on the mother board works. ... Try the boot again. ... Try another slot for the memory card. ...
    (microsoft.public.windowsxp.general)
  • Re: Prism board not found??
    ... I have replaced the mother board with a new one, ... totaly dead to start with so I replaced the motherboard and cpu with NOS ... I got the error message no boot device detected. ... The game isn't detecting your prism card for some reason. ...
    (rec.games.pinball)
  • RE: Do I need to recompile my standard kernel to enable ipfw?
    ... Installation Disc Won't Boot ... FBSD-friendly UPS for home needs ... ath pccard ok on 6.1 600mhz laptop, ...
    (freebsd-questions)
  • Re: Interesting RFM boot problem(s)
    ... replacements and they were fine. ... today and plan do the reflash of the card from the PC, ... If all that failed to resolve the issue, I'd concentrate on the PRISM. ... ordered new caps for the mother board per the guide at ...
    (rec.games.pinball)