Re: pinball 2000 monitor tip

On Jul 31, 9:03 am, "Mickey Johnson" <micks...@xxxxxxxxxxxxxx> wrote:

Scroll down to Arcade Monitor Amplifier. This is the product that you will
need. You will also need to cut your original cable (not recommended) or
make a short jumper that goes from the amplifier to your monitor input.

Mickey, this mod sounds really cool. I have the same feeling about my
RFM ...I mean, it looks pretty good - but I wish it was more vibrant
without having the 'grey' blacks.

So - if you don't recommend cutting the cable, how do you make the
jumper? Could you show some pictures or give a short tutorial?

Thanks!
Greg

.

Relevant Pages

  • Re: Bios password problem
    ... Am I hearing you correctly when you recommend moving the jumper, ... rebooting, and then shutting down, moving the jumper back, and rebooting? ... MB manual says to briefly "Short" the pins with the power off, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: add 2nd hard drive
    ... Art wrote: ... >What I'm curious about is why you recommend he jumper the drive as Slave. ...
    (microsoft.public.windowsxp.general)
  • Re: Storage Devices on Ataris
    ... in article 44020fde_1@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx, Mark Branson wrote ... There are three sets of jumper pins inside but the ... |I recommend not messing with these, unless you know fully what you are ... I got my drives off eBay and they came without leads or a manual. ...
    (comp.sys.atari.st)
  • Re: Adding a HD
    ... Mickey Mouse wrote: ... > plugged it into IDE2 on the mobo. ... >> I'd set it to slave, and add it in (assuming you are using the same ... If you don't know what the jumper pattern is, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: good cheap cigar?
    ... >Mickey wrote: ... >>>I can recommend with confidence the Old Fashioned Honduras #4 from ... Prev by Date: ...
    (alt.smokers.cigars)