Re: tech black hole flippers.

Sorry Nick. Didnt see your posts until now. Google has beeen acting
very strange lately. So its the relay with only 3 switches, and are
they suppose to be open or closed? All 3 of mine are closed.

.

Relevant Pages

  • Re: I want a Dragon Growl. Bally Lost World
    ... displays and from what I have read, they push the 5V circuit to the ... to wire the return for the relay coils into the appropriate solenoid ... the ground path is completed and the solenoid fires. ... Than stack the switches at the targets and switches ...
    (rec.games.pinball)
  • Re: TecH EM: 1957 GTB Royal Flush Start-up Problem
    ... the score motor would run but nothing else ... enough power was getting past the relay bank to the playfield. ... All the switches on the S ... snowshoe to break contact, it keeps going, back around to 90, where it ...
    (rec.games.pinball)
  • Re: EM help Gottlieb Mustang 100s relay locked
    ... gapping a little bit in the ABC sequence bank, ...  When a game is started, the game resets, then ... relay stays on. ...  Those switches are below the playfield, ...
    (rec.games.pinball)
  • Re: EM help Gottlieb Mustang 100s relay locked
    ... gapping a little bit in the ABC sequence bank, ... relay stays on. ...  Those switches are below the playfield, ... The hundred point pop bumper relay seems fine. ...
    (rec.games.pinball)
  • Re: 71 Bally Vampire repair
    ... schematic but it does not look like the black wire ever went there. ... activates a relay in the cabinet but the post does ... to adjust the switches for the player 1/player 2 relay, ... Oh and I can send you the schematics if you want. ...
    (rec.games.pinball)