Stern Ali feature lamps and bridge removal
Ive recently aquired an Ali from ebay, that works great, except for
the feature lamps/ F1 fuse.
After working on the machine, and searching here for clues, I have
determined it is the bridge for the feature lamps, (removed J1 and J3-
backbox, and fuse still blows), and want to change it out.
ANYWAY,
Any clues on unsoldering that pesky rascal!?!? Man they are hard to
get off there.
Thanks for any info,
.
Relevant Pages
- Fuse Blows
... blown power line 'slo blow' fuse. ... "insta-on" feature that kept the tube filaments lit while the set was ... I disabled this feature by snipping a diode across the on-off ... The set played fine for about four days then the fuse blew. ...
(sci.electronics.repair) - Re: Stern Seawitch Fuse Question
... Any voltage fuse will work for the feature lamps- they are 6vdc. ... Action Pinball & Amusement, LLC ...
(rec.games.pinball) - Re: -mm -> 2.6.13 merge status (fuse)
... > definitely don't want to disable unprivileged mounts. ... If the choice was "merge FUSE without unpriv mounts for now" or "discard ... that feature and then spend the time getting that feature right _in ... send the line "unsubscribe linux-kernel" in ...
(Linux-Kernel) - Suppressing Print Status Balloon
... everytime we print. ... Any clues on how to stop this "feature" ... TIA ...
(microsoft.public.windowsxp.customize) - Tech:General illumination not working on DM
... The entire lower left playfield general illumination is out on my Demolition ... Any clues to where I should look first? ... Fuse, loose wire??? ...
(rec.games.pinball) |
|
