Tech: Help Needed- Bally Power Play

Some of the wires to the J1 (I think) plug (the upper left plug on the
MPU board, 28 pin connector) were out of the connector. Could someone
take a look at theirs and post the wire colors for pins to this plug.

Thanks in advance for the help!

rjones

PS- shameless plea- I need a backglass for this pin. Anyone have one
for sale? Can be an average condition.

.

Relevant Pages

  • Re: Wiring help?
    ... Hand wrangling the wires into the right place to ... crimp on a plug can be a right pain. ... And when we did use them, we had smaller 6 pin ... the larger 8 pin connectors on everything. ...
    (Fedora)
  • Re: USB interface for Radio Shack PZM mics?
    ... PZMs from 20 years ago actually have an output transformer and there are three wires coming ... The shield and one of the wires are tied to the sleeve of the plug, ... shield to pin 1, one of the signal wires to pin 2 and the other wire to pin 3. ...
    (rec.audio.pro)
  • Re: IC22A
    ... from the 3 pin plug at the radio end. ... have any idea as to which wires should be soldered to which of the ... leaves you the other wire that will go to the none PTT pin. ...
    (uk.radio.amateur)
  • Re: Im a dope: P5K board, does it have a 4 or 8 pin cpu power connector?
    ... connector for the cpu? ... Current 550 watt power supply only has 4 pin cpu power connector. ... wires going to the GND pins. ... what looks to me like a 4 pin connector. ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Electric Shock ?
    ... Describe the plug end and machine end. ... Mains lead with UK style 3 pin plug, ... They had three wires blue, brown, green/yellow ... electrolytes) and lots of electrical equipment. ...
    (sci.electronics.repair)