Re: Crazy BSD Mist Multiball Issue?

I'd suspect the wiring harness ( the coiled one ) supply power to the magnet
first. It is a wear item and you easily could have a break in it driving you
nuts. LTG :)

"cfbenn" <cfbenn@xxxxxxxxx> wrote in message
news:o4rlv2hkdoq5ruu66dk6hagdat55f4dp2b@xxxxxxxxxx
Im hoping someone might be able to help lead me on the right path to
fixing my mist multiball on Bram Stoker's Dracula.

A bit of background. I received the game missing the right wire gate
and with a dead magnet motor. I located the gate and fixed the motor
(broken inductor on motor emi pcb). I also suspected the long range
emitter opto was bad so I replaced it as well. I also swapped the
sw24 opto pcb out of my shadow, since the current one had a broken
inductor on it as well. Everything looks like it should be all ready
to go now but I still have one issue.

Currently it is having problems with dragging the ball across. At
startup of a game, it fails to load the mist ball and then the motor
goes back and forth, back and forth for awhile. The gates open and
close when needed. If I place a ball on the magnet, it will drag it
1/3 across then drop it. This happens in both directions. In fact,
if I do an "load magnet" test, I get the same behavior. I tried
manually blocking an opto while it was dragging the ball, with the
theory that the game will think the ball is always on the magnet. But
it still drops in the same places.

But the odd part is that if I do a 'magnet on + left' or a 'magnet on
+ right' test, the ball gets dragged the whole way across. I ran this
over and over and the ball never drops but completes the whole
movement across the playfield. This eliminated the idea of a wire
being pinched when the motor is moving.

Any suggestions? I am starting to think that operators must have had
a real fun time trying to keep this option working when the game was
on location.



.

Relevant Pages

  • Re: I havent beaten the game(LOTR), but destroying the ring is a blast!
    ... It came from a family's game room in Irvington ... I hate it when i hit the DTR shot, but the magnet grabs the second ... ball, and the first one gets knocked thru and doesnt register the ... - making knocking the ball out of the ring magnet pretty tricky- Hide quoted text - ...
    (rec.games.pinball)
  • Re: Williams SlugFest
    ... friend who is familiar with the game and he told me the same thing. ... Slugfest game and it seemed that with that one you could make the ball ... test mode the OS momentarily turns each driver on. ... connectors and make sure you have full voltage at the magnet. ...
    (rec.games.pinball)
  • Re: NBA a Desert Island Pin
    ... (The magnet repeating thing was a bit sad IMO: ... with old elements is better then an average game with new things, ... One ramp, yet that ramp can route the ball all over the ...
    (rec.games.pinball)
  • Re: Crazy BSD Mist Multiball Issue?
    ... Test mode may power the motor differently, like the coils, and a different ... It will pull the ball about halfway across the playfield ... The game could just be confused.. ... in load magnet test, but you never know. ...
    (rec.games.pinball)
  • Re: Has anyone had the 3rd magnet multi work for TZ?
    ... powerball I get than send it back to the gumball, so the game knows ... were the powerball is, than I load one ball in the lock and send the ... first ball would be caught on the left magnet than the next ball would ...
    (rec.games.pinball)