Re: TECh: RFM Monitor will not turn on



On Mar 11, 6:55 pm, "Michael P" <mich...@xxxxxxxxxxxxxxxx> wrote:
I would greatly appreciate any help on this matter. I just got a RFM
in amazing condition, but the monitor will not turn on. When you turn
the machine on at the switch, the computer boots, and after a couple
of seconds the playfield lights come on. If you push the start
button, the game plays, but no monitor. It had come on for about 5
seconds once during my inspection, then went dark. Anyone know where
I should look?

Thank you,

Michael

the vga cable probably came partially, or totally, unplugged from the
computer. Always happens on pin2k ;-)

.



Relevant Pages

  • Re: Strange Monitor Problem
    ... See if the computer boots in to windows safe mode by pressing F8 repeatedly ... when you start the computer.If succeeded,Then uninstall the programs one by ... Something must have happened and the monitor screen went black. ...
    (microsoft.public.windowsxp.general)
  • Re: Video card output problems
    ... However, when I plugged my computer back into my old monitor, it seems to have "forgotten" how to output to it. ... The computer boots up normally, but as soon as it goes to the welcome screen, the monitor shows "no signal input". ... Have you tried booting into Safe Mode, press F8 while booting, to have it boot in VGA resolution and then changing the resolution there? ...
    (microsoft.public.windowsxp.hardware)
  • Re: TECh: RFM Monitor will not turn on
    ... but the monitor will not turn on. ... the machine on at the switch, the computer boots, and after a couple ... Always happens on pin2k;-) ...
    (rec.games.pinball)
  • Re: TECh: RFM Monitor will not turn on
    ... but the monitor will not turn on. ... the machine on at the switch, the computer boots, and after a couple ... glow in the yolk of the monitor either. ...
    (rec.games.pinball)
  • Re: Electronic multi-switches
    ... An electronic switch of some sort works as ... when an Atari mono monitor is present ... whenever an Atari monitor is used it will work just ...
    (sci.electronics.basics)