Re: Slow droptarget

The target bank isn't difficult to rebuild. De-solder a couple wires
and remove 4 (or 6?) screw that hold the mech to the pf. Once it's out
it's pretty easy to rebuild on a bench. Do one target at a time and be
VERY careful when removing the c-clips because the tend to fly off into
oblivion never to be seen again. Replace the coil sleeve as well and
clean the plunger.

You might want to get a set of new target decal and replace those since
you need to remove the mech to do that the right way. Those targets get
a lot of abuse from the close pop bumpers.

And I know some will say NO WAY to this but I found some Teflon lube
and I put 2-3 drops on the target body and they drop and snap back up
like nobody's business! I'm not too worried about them getting gummy
and after tons of games they are still fine. Good luck!

nomad

Clobyn wrote:
In my Earthshaker the left of the three drop targets drops slowly. When
it's hit, it immediately goes halfway down, and than usually sink
slowly all the way down (sometimes it needs another hit to go down all
the way). It does work (ie the hit is registered) and the drop targets
are reset just fine. How can I fix this?

.

Relevant Pages

  • Re: Gaining control of build dependency...
    ... There are numerous other reasons the target should get updated, ... descrip.mms and descrip2.mms in the command line, ... MMS file that is included? ... a rebuild of the target executable. ...
    (comp.os.vms)
  • RE: FreeBSD Security Advisory FreeBSD-SA-05:01.telnet
    ... the security advisories just have you rebuild the ... > For historical reasons, the telnet build is rather messy: ... there isn't a cushy Makefile somewhere with a target to ...
    (FreeBSD-Security)
  • Targetting a class library for both 3.5 and 2.0
    ... I have a rather big class library solution with lots of projects. ... Basically, I'd like to be able to target 3.5 and rebuild, getting new things into the new dll's for 3.5, and also be able to target 2.0 and rebuild, to get files for 2.0. ... Lasse Vågsæther Karlsen ...
    (microsoft.public.dotnet.languages.csharp)
  • Re: Whats in kbuild.git for 2.6.19
    ... It tells why a target got ... kbuild rebuild that much after changing just a tine CONFIG_ ... for Documentation/kbuild/modules.txt kbuild: linguistic fixes for ...
    (Linux-Kernel)
  • Re: One Inch Punch
    ... >>If you hit something and tighten all the muscles at that moment.. ... acting like the mucles tightening. ... its not adding anymore power to the collision. ... target, it goes too slow to keep up a shockwave effect. ...
    (rec.martial-arts)