A BAD day for SWE1 - Tech help needed
- From: "SilverUnicorn" <chrisandmelm@xxxxxxxxxxx>
- Date: Sat, 15 Jul 2006 13:41:20 -0400
I was in the basement, enjoying a nice game of Pinball 2000, when all of a
sudden...BLAMMO! All the lights went off, and a distinct smell of burnt
components fills the room.
See, apparently, in the basement, I can not tell when there's a severe
thunderstorm outside. Something hit very close. The power came back on, but
the SWE1 did not. I tried the power switch, and nothing. Dead. I checked all
the fuses with a meter (man there's alot of them!!) and they all are ok. I
thought the power supply may have gone bad, so I replaced that with a spare
I had. Still nothing. I replaced the CPU with a spare I had, and nothing. I
also switched the power cord with another I had and that produced no signs
of life either.
I discovered the burnt component smell was from the ran relays in our Lutron
Homeworks system. The ceiling fans did not work after the outage either, so
those were done. I replaced these components and the lighting system is good
to go now (not that anyone cares, just a side note) but the SWE1 is still
DOA.
Any ideas on what else I could try? I did verify that the outlet the machine
is plugged into is functional, which it is.
Please e-mail me at wmspins@xxxxxxxxxxx if you have any ideas. FWIW, the
Black Knight machine I had plugged into the same outlet seems to be fine, or
at least no worse then before the power went out.
Thanks in advance,
Chris
.
- Follow-Ups:
- Re: A BAD day for SWE1 - Tech help needed
- From: John Wart, jr
- Re: A BAD day for SWE1 - Tech help needed
- From: pinballpete
- Re: A BAD day for SWE1 - Tech help needed
- Prev by Date: Re: Bally lamp board help please....
- Next by Date: Re: Got my NAPPA Funhouse plastic set and translite today!
- Previous by thread: WTB : Cirqus Voltaire - Mint condition
- Next by thread: Re: A BAD day for SWE1 - Tech help needed
- Index(es):
Relevant Pages
|