Re: TOM Trunk Problem
- From: "Lloyd Olson" <ltg@xxxxxxxxxxxxxxx>
- Date: Sun, 30 Apr 2006 13:03:02 -0500
To adjust that eddy sensor, turn the tiny potentiometer until the LED lights
up, and then turn back just until the LED goes out. If it's not staying set,
then check the connectors that they are tight and after that it might be
time to replace the potentiometer. LTG :)
"Tony" <tonydembeck@xxxxxxxxxxxxxx> wrote in message
news:1146411524.446515.242440@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Help. Hitting the magic trunk during beginning of game works fine and
eventually the trunk doesn't register hits. When the magnet is visible
and hit it rarely works. I've tested the magnet and everythings good.
One thing we did is manually turned the trunk with my hand to release a
ball that was stuck during play. Did the alter the Eddy sensor.
I've read the part on Eddy sensor. Is this the only thing I need to
adjust to remedy the problem?
Thanks all for your help - Tony
.
- References:
- TOM Trunk Problem
- From: Tony
- TOM Trunk Problem
- Prev by Date: Re: Hyperball Weirdness
- Next by Date: Re: Sinister pinball design elements
- Previous by thread: Re: TOM Trunk Problem
- Next by thread: Translight Lightbox For Sale
- Index(es):
Relevant Pages
|
