Re: Tech:pop bumper/catacomb

Sure. Pinball Resource has the sockets: WLL-24-8776. Feed the leads
down through the body. Press the black socket against one side of the
body and pull the leads tight. Feed insulator over the leads, solder
and [re]staple. The lamp will lean over from one side of the body to
the other. That's a good thing because it moves the lamp ever so
slightly away from the cap, which helps reduce discoloration of the
cap.

-cody
CARGPB#4

Ken wrote:
> I was wondering if can change out the pop bumper lights in my catacomb to
> the wedge lamp/555 light? Does anyone have any thoughts or feedback on
> this, let me know.
>
>
> Thanks,
>
> Ken

.

Relevant Pages

  • Re: TECH: Capacitor (idiot) question
    ... I am admittedly "just" a solder slinger, ... sitting around that I would like to use to replace another cap of the ... I was going to just solder some leads on it and plunk it on the board ... It can matter which cap you use - Electrolytics have various ratings ...
    (rec.games.pinball)
  • Re: Replace capacitors Part 2
    ... but separate issue to noise on the supply rail. ... We are talking about capacitor legs here - any induced hf wobbles are ... going to get damped by the cap anyway. ... Long leads are bodges to a greater or lesser extent, ...
    (uk.comp.homebuilt)
  • Re: TECH: Capacitor (idiot) question
    ... positive lead, and no marking for the negative. ... I am admittedly "just" a solder slinger, ... sitting around that I would like to use to replace another cap of the ... I was going to just solder some leads on it and plunk it on the board ...
    (rec.games.pinball)
  • Re: TECH: Capacitor (idiot) question
    ... and no marking for the negative. ... Steve Kulpa (cargpb10) ... sitting around that I would like to use to replace another cap of the ... I was going to just solder some leads on it and plunk it on the board ...
    (rec.games.pinball)
  • Re: Volvo 850 misfire under acceleration..
    ... Firstly although plug interval is 30k on these engines, the plugs are past ... Secondly, 120k on the original HT leads, and more-over rotor arm and cap is ...
    (uk.rec.cars.maintenance)