Re: TECH: RFM problems since conversion PLEASE HELP!

On Sun, 4 Dec 2005 13:33:23 -0500, "SilverUnicorn"
<wmspins@xxxxxxxxxxx> wrote:

>Got things working. Thank you for the replies.
>
>Turns out That when I removed the LED saucer kit, the game reported Fuse 112
>blown. Replaced fuse, all was well with the world.
>
>Hooked up LED kit, fuse blows. Not sure why, but for now, no saucer LED's
>:-(

This happened to me, too. Are your pop bumper lights working?
.

Relevant Pages

  • Re: TECH: RFM problems since conversion PLEASE HELP!
    ... Now they are blown. ... >>Turns out That when I removed the LED saucer kit, ... Replaced fuse, all was well with the world. ... Are your pop bumper lights working? ...
    (rec.games.pinball)
  • Re: TECH: RFM problems since conversion PLEASE HELP!
    ... >Turns out That when I removed the LED saucer kit, ... >blown. ... Replaced fuse, all was well with the world. ...
    (rec.games.pinball)
  • Microwave problem
    ... Our 20 year old JC Penney microwave, model 5919-00-40, ceased to ... over to see if there were any obvious problems, such as another blown ... fuse, which there weren't. ... By accident I shorted out part of the transformer for the board, ...
    (sci.electronics.repair)
  • Re: Circuit to detect blown fuse
    ... I would like a green LED to show the fuse is not ... blown and a red LED to show when the fuse has blown. ... After the smoke had cleared, the fault indicator was glowing ...
    (sci.electronics.design)
  • Re: Circuit to detect blown fuse
    ... I would like a green LED to show the fuse is not ... blown and a red LED to show when the fuse has blown. ... After the smoke had cleared, the fault indicator was glowing helpfully. ...
    (sci.electronics.design)