Re: Clay and consequences
- From: NoSpam@xxxxxxxxxxx (Bob Masta)
- Date: Fri, 18 Jul 2008 12:06:35 GMT
On Thu, 17 Jul 2008 19:21:57 -0400, "D Kat" <disisdkat@xxxxxxxxxxx>
wrote:
<snip>
When mixing up glazes or
clay it should be done with a mask and you and your clothes should be washed
afterwards. The fine dust of silica can stay in the air for days - spray
the area with a mister after playing with materials.
Not trying to be picky here, just want to make clear to any clay
newbies that "mask" is *not* one of those little disposable "dust
masks" they sell in the paint aisle for a buck or two. It should be
what they typically call a "respirator" that covers the bottom half of
your face with an air-tight seal. These have replaceable filter
cartridges rated for various substances. If you buy the unit at your
local hardware store, it will probably come with "Organic vapor/P95"
for paint and pesticides. This is really a 2-stage unit: The vapor
cartridge is the bulky part closest to your face, which is typically
removable via a twist-lock. You don't care too much about this part
for pottery work. Just leave it as-is.
The "P95" is a fuzzy white particulate filter pad that goes over the
cartridge, usually with some sort of simple snap arrangement.
P95 means it is rated to remove 95% of the particulates bigger than
0.3 micron ("fume sized" particles). While that is orders of
magnitude better than a disposable dust mask (those *always* leak air
around the edges), it is recommended that you get a P100 replacement
filter. These remove 99.97% and are also called "HEPA" for High
Efficiency Particulate Air filters. As far as I know they are always
pink, not white. (There are also apparently thinner/chaper N100 and
R100 versions that need replacing more often, but I've never seen
them.) Replacement P100 pads are around $5.00 per pair from on-line
suppliers.
The main thing with a respirator is that it *must* have an air-tight
seal around your face, so that all the air you breathe in comes
through the filters. That requires a soft rubber construction with a
very flexible lip or edge. When you buy a respirator, the
instructions explain how to test for a good seal. Some designs may
work better than others with your particular face shape, especially
for those with beards. If you don't have a good seal, you don't have
a respirator... take it back and try again! (Maybe you could try on a
friend's ahead of time, to see if that model is right for you...
someone who doesn't mind sharing "cooties" with you!)
Best regards,
Bob Masta
DAQARTA v4.00
Data AcQuisition And Real-Time Analysis
www.daqarta.com
Scope, Spectrum, Spectrogram, Sound Level Meter
FREE Signal Generator
Science with your sound card!
.
- Follow-Ups:
- Re: Clay and consequences
- From: D Kat
- Re: Clay and consequences
- References:
- Clay and consequences
- From: Susie Thompson
- Re: Clay and consequences
- From: D Kat
- Clay and consequences
- Prev by Date: NC Oct 12-18 Workshop!
- Next by Date: Re: Clay and consequences
- Previous by thread: Re: Clay and consequences
- Next by thread: Re: Clay and consequences
- Index(es):
Relevant Pages
|
Loading
