Re: Electrical schematics on Linux?

On 2009-04-01, Pete C. <aux3.DOH.4@xxxxxxxx> wrote:

Ignoramus25062 wrote:

On 2009-04-01, Lew Hartswick <lhartswick@xxxxxxxxxxxxx> wrote:
Ignoramus8285 wrote:
I have a couple of things that I have done and I want to write and
retain schematics of them. One is a fancy phase converter with two
idlers that are switched at different times. Another is a fancy wiring
scheme for my compressor, to permit "on demand" vs "continuous" run,
as well as a start button to prevent unintended starts.

I did it without drawing schematics just by keeping it in my head.

In any case, I still remember how I did my phase converter 4 years
ago, but I do not want to rely on my memory.

So. Is there some easy to use Linux software that is available under
ubuntu, that I could use to draw electrical schematics.

thanks
What is the matter with a pencil and paper?????

Nothing wrong.

Personally, I like to keep everything in the computer, that way I do
not lose it.

There are many tools available free from PC board manufacturers,
possibly even some linux versions, if not then run under an emulator
perhaps?

I found Geda, which I liked enough because I could actually finish my
drawing. I did not find some symbols that I needed, like that of mag
starter, but I substituted something else.

The drawing, however lame, is here:

http://tinyurl.com/d2sgw6

--
Due to extreme spam originating from Google Groups, and their inattention
to spammers, I and many others block all articles originating
from Google Groups. If you want your postings to be seen by
more readers you will need to find a different means of
posting on Usenet.
http://improve-usenet.org/
.

Relevant Pages

  • Re: Electrical schematics on Linux?
    ... One is a fancy phase converter with two ... I did it without drawing schematics just by keeping it in my head. ... I still remember how I did my phase converter 4 years ... If you want your postings to be seen by ...
    (rec.crafts.metalworking)
  • Re: Electrical schematics on Linux?
    ... One is a fancy phase converter with two ... I did it without drawing schematics just by keeping it in my head. ... I still remember how I did my phase converter 4 years ... If you want your postings to be seen by ...
    (rec.crafts.metalworking)
  • Re: Electrical schematics on Linux?
    ... One is a fancy phase converter with two ... idlers that are switched at different times. ... I did it without drawing schematics just by keeping it in my head. ... I still remember how I did my phase converter 4 years ...
    (rec.crafts.metalworking)
  • Re: Electrical schematics on Linux?
    ... One is a fancy phase converter with two ... idlers that are switched at different times. ... I did it without drawing schematics just by keeping it in my head. ... I still remember how I did my phase converter 4 years ...
    (rec.crafts.metalworking)
  • Re: Electrical schematics on Linux?
    ... One is a fancy phase converter with two ... I did it without drawing schematics just by keeping it in my head. ... I still remember how I did my phase converter 4 years ... Is there some easy to use Linux software that is available under ...
    (rec.crafts.metalworking)