Pictures of the Y axis readout

http://igor.chudov.com/projects/Clausing-Colchester-13-36-Master-Lathe/09-Y-Axis-Readout/

If anyone wants to question why the reading head goes along the scale
and not at 90 degrees, the answer is that I already had the scale the
way it is. I wish that it had a more cross-slide-friendly orientation,
but alas, it did not. But it still works fine.

--
Due to extreme spam originating from Google Groups, and their inattention
to spammers, I and many others block all articles originating
from Google Groups. If you want your postings to be seen by
more readers you will need to find a different means of
posting on Usenet.
http://improve-usenet.org/
.

Relevant Pages

  • Re: Ebay stuff...what do I with with em?
    ... And emailing them is like pissing into the wind. ... Due to extreme spam originating from Google Groups, ... If you want your postings to be seen by ...
    (rec.crafts.metalworking)
  • Re: Obamas landslide?
    ... and reducing budget deficit by increasing taxes. ... Due to extreme spam originating from Google Groups, ... If you want your postings to be seen by ...
    (rec.crafts.metalworking)
  • Re: Welding one of the worst occupations, according to WSJ
    ... If I remember the article right, they rated it by how physically hard ... Due to extreme spam originating from Google Groups, ... If you want your postings to be seen by ...
    (sci.engr.joining.welding)
  • Re: best way to weld together two 1/4" lead sheets?
    ... The backing plate would address melt-through nicely. ... Due to extreme spam originating from Google Groups, ... If you want your postings to be seen by ...
    (rec.crafts.metalworking)
  • Re: Bench grinder motor for Ig
    ... Due to extreme spam originating from Google Groups, ... If you want your postings to be seen by ... I called GE about warrantee information and was informed that the ...
    (rec.crafts.metalworking)