Re: Tramming the mill
- From: Gunner Asch <gunner@xxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 30 Jun 2008 14:00:49 -0700
On Mon, 30 Jun 2008 15:45:26 -0400, Ned Simmons <news@xxxxxxxxxx>
wrote:
On Mon, 30 Jun 2008 13:17:41 -0500, RB <burkheimer@xxxxxxxxx> wrote:
Terry Coombs wrote:
Got the new machine set up on it's base today , and checking it out ,
cleaning , getting it ready to use . I chucked a rod with a dial indicator
mounted on it in the drill chuck , just to see ...
I'd suggest you use a collet to hold the DI rod.
drill chucks can impart error
Not if he's sweeping the table with the indicator. The indicator point
will follow the spindle's center of rotation regardless of how bad the
runout of the rod is.
assuming the chuck as no pitch and yawl......
gunner
"The American people will never knowingly adopt socialism, but under the
name of liberalism they will adopt every fragment of the socialist program
until one day America will be a socialist nation without ever knowing how it
happened." -- Norman Thomas, American socialist
.
- Follow-Ups:
- Re: Tramming the mill
- From: Jim Wilkins
- Re: Tramming the mill
- References:
- Tramming the mill
- From: Terry Coombs
- Re: Tramming the mill
- From: RB
- Re: Tramming the mill
- From: Ned Simmons
- Tramming the mill
- Prev by Date: Re: Bought a clausing 13x36 lathe today
- Next by Date: Re: Tramming the mill
- Previous by thread: Re: Tramming the mill
- Next by thread: Re: Tramming the mill
- Index(es):
Relevant Pages
|
