Re: Methylene Chloride....was Re: Loctite Disolver ?
- From: Brian Lawson <lawsonb@xxxxxxxxxxxx>
- Date: Thu, 27 Sep 2007 10:00:36 -0400
Hey Lloyd,
Good trick. I will never see any quantity of it in gallons, or even
litres, but I'm sure the principle would apply for even very small 1
or 2 OZ amounts.
And speaking of "weight", we used Chlorothene Nu and Chlorothene EC
for cleaning large elevator control panels in the old days. (Probably
wouldn't be allowed today, and besides all the new ones are primarily
on PC boards.) It always surprised me how heavy the containers were
to pick up, much heavier than water or oil or varsol, whether in a 1
gallon jug or a 5 gallon pail. Just a surprise when grabbed without
thinking.
Take care.
Brian Lawson,
Bothwell, Ontario.
XXXXXXXXXXXXXXXXXXXXXXXXXXX
On Thu, 27 Sep 2007 13:16:30 -0000, "Lloyd E. Sponenburgh"
<lloydspinsidemindspring.com> wrote:
Brian Lawson <lawsonb@xxxxxxxxxxxx> fired this volley in.
news:7a8nf3djk5jn9dq9l9sjgec1h5f3nc099p@xxxxxxx:
I can't recall how they store/stock
the stuff in the bulk quantities they use, but even in a closed bottle
they put my few ounces in its GONE by magic within a month, long
before the day I've ever wanted to use it.
Brian, there's a trick to keeping methylene or ethylene chloride. It
does have a very high vapor pressure, and will even evaporated out of the
bottle if kept in your freezer.
I've kept a gallon in my unconditioned barn for over five years, and have
lost only about a quart to evaporation in that time. Here's the trick:
I bought a five gallon blue gas can (to visually distinguish it from my
red gas and yellow diesel cans). Put the methylene chloride in, not more
than half full. Gently fill the container to near the top with clean
water.
Surprisingly, methylene chloride is quite a bit more dense than water,
and almost totally immiscible with it. The methylene chloride stays on
the bottom, and water "cap" exerts enough hydraulic pressure and enough
passivation to the interface to almost totally prevent evaporation.
When I wish to dispense it, I merely invert the can so the air bleed cap
is bottom-most, then give it a gentle shake to float any water beads out
of the cap recess. Crack the cap, and the clean methylene chloride flows
out (under pressure, no less) into my working vessel.
Your can will swell in warm weather. It will collapse in the cold if you
don't replenish the used amounts with more water.
LLoyd
- References:
- Loctite Disolver ?
- From: pogo
- Re: Loctite Disolver ?
- From: Robbo
- Methylene Chloride....was Re: Loctite Disolver ?
- From: Brian Lawson
- Re: Methylene Chloride....was Re: Loctite Disolver ?
- From: Lloyd E. Sponenburgh
- Loctite Disolver ?
- Prev by Date: Re: AA battery hack secret
- Next by Date: Re: NRA knife made in China
- Previous by thread: Re: Methylene Chloride....was Re: Loctite Disolver ?
- Next by thread: Re: Loctite Disolver ?
- Index(es):
Relevant Pages
|