Re: Sizing a fuse for 1/3 hp motor
- From: "DanG" <dgriff23@xxxxxxxx>
- Date: Sat, 22 Sep 2007 17:30:33 -0500
Looks as if you want to try to fuse it for
6 amps (might blow under heavy load)
6.5 amps - should work well
7 amps - should still be okay
--
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)
dgriff237@xxxxxxxx
"Camilo Ramos" <ceramosb@xxxxxxxxxx> wrote in message
news:46f57fc9$0$26483$88260bb3@xxxxxxxxxxxxxxxxxxxx
I want to add a fuse for overloading protection to the motor I
use on the
Gingery lathe . The motor came from a very old washing machine.
It is
Delco brand .The nameplate has this info:
HP=1/3
V=115
AMP=6.1
C.RISE=50
TYPE=CONT
PH=1
RPM=1725
TYPE=CS
CODE=J
Googling around yields tons of info on 3-phase motors but little
of
practical use on single-phase.
Thanks in advance
Camilo Ramos
--
Posted via a free Usenet account from http://www.teranews.com
.
- References:
- Sizing a fuse for 1/3 hp motor
- From: Camilo Ramos
- Sizing a fuse for 1/3 hp motor
- Prev by Date: Re: Specs that are part English and part metric
- Next by Date: Re: FS - Bandsaw
- Previous by thread: Sizing a fuse for 1/3 hp motor
- Next by thread: Re: Sizing a fuse for 1/3 hp motor
- Index(es):
Relevant Pages
|
