Re: Need tips on single point threading

I works to do it backwards on my 10EE. Put cutting tool on back side, lathe
in reverse. Stop machine with 1/2 nut engaged right at shoulder, you can
fiddle till its just right. Turn compound in to make cut. Turn lathe on in
reverse, it threads from the shoulder out. You need a small narrow groove
right at the shoulder to have a spot to advance the compound when the
machine is off.


.

Relevant Pages

  • Re: Need tips on single point threading
    ... Stop machine with 1/2 nut engaged right at shoulder, ... Turn compound in to make cut. ... reverse, it threads from the shoulder out. ... You need a small narrow groove ...
    (rec.crafts.metalworking)
  • Re: Reverse backcrosses
    ... >>> opposite sholder and catch it ... >>> your arse on the right side. ... >> think are called reverse shoulder throws... ...
    (rec.juggling)
  • Re: backcross/shoulder throw terminology
    ... shoulder, no matter what hand catch it, ... But catching hand is important for reverses: If the throw goes above the ... to the catching hand), no matter what hand throw it, it will be a reverse ... backcross if it goes from front ...
    (rec.juggling)
  • Re: juggling records question: reverse shoulder throws
    ... a backcross goes behind the back and comes over the opposite shoulder from ... the hand its thrown from. ... A reverse backcross is thrown straight backwards over the same shoulder, ... I've been recording the reverse backcrosses as ...
    (rec.juggling)
  • Re: backcross/shoulder throw terminology
    ... shoulder, no matter what hand catch it, ... to the catching hand), no matter what hand throw it, it will be a reverse ... backcross if it goes from front ... with 3 and 4 balls. ...
    (rec.juggling)