Springs with axial wire ends?


Is there a common part that is a spring with axial wire ends? In other
words, a spring with wires that go straight out from the ends?

I see tension springs at McMaster-Carr, but I'm looking for axial wire
springs.

Those tension springs might do what I need, but axial wire ends and
longer wire ends would be better (looks like 4 inches is maximum).

Thank you.



.

Relevant Pages

  • Re: Springs with axial wire ends?
    ... I see tension springs at McMaster-Carr, but I'm looking for axial wire ... You can't 'idiot proof' anything....every time you try, ...
    (rec.crafts.metalworking)
  • Re: Springs with axial wire ends?
    ... I see tension springs at McMaster-Carr, but I'm looking for axial wire ... Look into magnetic mounted radio antenna. ...
    (rec.crafts.metalworking)
  • Re: garage door lift cable loosens as door reaches fully open height
    ... then when raising the door by hand to check it's operation manually, ... I have to assume that you have the type with the two springs on a bar ... the friend's garage door may have had ... The first time I replaced the pair of tension springs on one of my ...
    (alt.home.repair)
  • Re: Springs with axial wire ends?
    ... | I see tension springs at McMaster-Carr, but I'm looking for axial wire ... If the spring design you are looking for do not have known applications at ... the present market to warrant mass production then it would be very ...
    (rec.crafts.metalworking)
  • Re: Tension Springs
    ... I was just thinking more straight forward method. ... >have a home made 10" dob and if I wanted to have tension springs ... I would try some springs I have lying around. ... >Actually I have never used a commercial 10" dob without springs, ...
    (sci.astro.amateur)