Source for 'Round' rack and pinion gear

From: "Ace" <thermo102@xxxxxxxxxxxxxxxx>
Date: Mon, 30 Apr 2007 20:45:37 GMT

I was given a small (about 8 inches overall height) arbor press which had
frozen up. I was able to finally get it apart and see that the pinion has a
couple mangled teeth. Hopefully I can replace it cheaply and ..... Both
the rack and pinion are 0.374 inch Diameter. Looks like the rack has about
11 teeth per inch.

Anybody know of a good source for same (or similar) round rack and pinions?

Thanks in advance for any info.

Ace

.

Prev by Date: Re: Looking for a new(er) RV..travel trailer..cheap
Next by Date: Re: Fiery crash collapses Bay Area freeway
Previous by thread: Message to Non Muslims
Index(es):
- Date
- Thread

Relevant Pages

Re: Source for Round rack and pinion gear
... couple mangled teeth. ... the rack and pinion are 0.374 inch Diameter. ... a chink unit will be ...
(rec.crafts.metalworking)
Re: Source for Round rack and pinion gear
... I was able to finally get it apart and see that the pinion ... couple mangled teeth. ... the rack and pinion are 0.374 inch Diameter. ...
(rec.crafts.metalworking)
Re: Source for Round rack and pinion gear
... I was able to finally get it apart and see that the pinion has a couple mangled teeth. ... Both the rack and pinion are 0.374 inch Diameter. ...
(rec.crafts.metalworking)
Re: order od system
... steering system(with double pinion, pinion and rack assembly from ... with steering wheel angle as input and Wheel steering angle as ... mass system(masses means inertial masses) or more or less. ...
(sci.engr.control)
Re: order od system
... steering system(with double pinion, pinion and rack assembly from ... with steering wheel angle as input and Wheel steering angle as ... mass system(masses means inertial masses) or more or less. ...
(sci.engr.control)