Re: please suggest me the losses in feed steam piping
- From: "Rick" <notta@xxxxxxxxxxx>
- Date: Thu, 31 Aug 2006 16:34:41 GMT
"Jim Stewart" <jstewart@xxxxxxxxxxx> wrote in message
news:7NydnXCg5pRok2rZnZ2dnUVZ_qOdnZ2d@xxxxxxxxxxxxx
manish power engineer wrote:^^^^^^^^^^^^^^^^
Hello
This is Manish Sharma from India. I am a POWER ENGINEER.
Presently I am working in a 3x25mw waste heat recovery power plant in a
major steel company.
I am responsible to check the planned steam piping losses of our power
plant.My steam piping length is 1.1km (plus expansion loops) and my
requirement at the CSEV of turbine is 64ata & 480deg C .The boiler
outlet pressure is 67kg/sq. cm (abs.)
The flow of steam is 125tonnes/hr
Please suggest me the:
1.Pipe sizing
2.Pressure losses and temperature losses.
3.material of pipe.
Manish,
This is a newsgroup of metalworkers. Some of
us are engineers of various types, but none
of us are willing to do your calculations for
you. That's your job. Good luck.
And possibly was one of ours until recently....
.
- References:
- please suggest me the losses in feed steam piping
- From: manish power engineer
- Re: please suggest me the losses in feed steam piping
- From: Jim Stewart
- please suggest me the losses in feed steam piping
- Prev by Date: Re: please suggest me the losses in feed steam piping
- Next by Date: Re: please suggest me the losses in feed steam piping
- Previous by thread: Re: please suggest me the losses in feed steam piping
- Next by thread: Re: please suggest me the losses in feed steam piping
- Index(es):
Relevant Pages
|
