Re: Sheesh!
"E. Walter Le Roy" <waltleroy@xxxxxxxxxxx> wrote:
Shortly after, a
relative came by for s short visit and wanted to see my shop. While showing
him around, I flipped the flywheel on my little engine and it cranked and
ran to perfection. He leaned over and said "What does it do?" I said "Hell,
it runs. Can't you hear it?"
Walt
Every family has one or two that makes you wonder if you are really
related.
Wes S
.
Relevant Pages
- Re: Midnight Repairs
... He pulled up behind the shop. ... As he shut down the engine it made that unmistakable tinny rattle of a dropped valve seat. ... He brightened up when I came back towing the floor jack, a pair of jackstands in my other hand. ... Or rather, 0015 Christmas Day. ...
(rec.autos.makers.vw.aircooled) - specific endplay question
... I got an engine from somewhere else (from a 67 baja ... I never drove the car much at all, ... Or at least once I removed the flywheel the first time I maybe didn't ... new shims and seals and o-rings and everything. ...
(rec.autos.makers.vw.aircooled) - Re: Did I get ripped off for a brake cylinder job?
... always something bantered about in the shop. ... production type who used to lay his time sheets around in conspicuous ... The crank gear was metal, ... The cam gear would wear out, and the engine ...
(rec.autos.tech) - Re: JP3 Tacho / rev Counter
... If you get an electronic revcounter sold as suitable for a diesel you have ... The sensor would be something like a flywheel sensor found on ... Get the engine warm and on idle and then use a mechanical ...
(uk.rec.waterways) - Re: Rebuilding my 302!
... The car will run acceptably well with a standard rebuild. ... The idea is to get air flowing at low valve lifts thus making the engine ... OR you could just have your machine shop rebuild the engine to stock specs. ...
(rec.autos.makers.ford.mustang) |
|
