Re: Armored control cable



Hey Fillister,

I didn't follow what your needs were, but I have 4 new cables used on
Mitutoyo DRO's.

I also see lots of defective DRO's at auctions (usually sans scales),
with cables attached that would still have a service life for a
hobbyist.

Take care.

Brian Lawson,
Bothwell, Ontario.
XXXXXXXXXXXXXXXXXXXXXx

Brian Lawson,'
Bothwell, Ontario.
On Sun, 30 Oct 2005 13:42:55 -0500, nospam.clare.nce@xxxxxxxxxxxxx
wrote:

>On Sat, 29 Oct 2005 09:07:56 -0700, Fillister <sct4539@xxxxxxxxx>
>wrote:
>
>>Pete, thanks for the reply but thats not what I'm looking for. It's not mc
>>or sealtite but a small armored cable approx .250 in dia.
>>
>Sounds like possibly one of the "Belden" sheilded cables, or a
>sheilded Twinax
>>On Sat, 29 Oct 2005 08:01:39 -0700, Pete C. <aux3.DOH.4@xxxxxxxx> wrote:
>>
>>> Fillister wrote:
>>>>
>>>> Hello, I Am hoping that some knowledgeable person here can give me an
>>>> idea
>>>> where to find or the proper name for the metal clad flexible control /
>>>> signal cable that is used on the read heads of dro's. Metal Content, I
>>>> need this for a control interface on my lathe. Thanks for your help
>>>> --
>>>> Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
>>>
>>> There are quite a few options, several of which you should be able to
>>> easily find locally.
>>>
>>> Sealtite is one brand of armored flexible conduit, it's a spiral steel
>>> conduit with a PVC jacket so it's both armored and waterproof. Used on
>>> power drops to outdoor A/C compressors among other things and readily
>>> found at home improvement stores.
>>>
>>> Another type is a flexible steel conduit they I've typically heard
>>> referred to as "Greenfield", probably a manufacturer reference. This
>>> type is not waterproof (no jacket) and looks just like the BX type wire
>>> except that it is empty so you pull your own wire through it. It is more
>>> flexible than the Sealtite type conduit. You may be able to find this
>>> one at home improvement type places, if not and electrical supply house
>>> will have it.
>>>
>>> An electrical supply house will also be able to get the many other types
>>> of flexible armored conduit, but many will be special order.
>>>
>>> Pete C.
.



Relevant Pages

  • Re: Wire size for 250 distance to garage?
    ... on a 60A circuit, but, again, due to the length of the circuit, bump it ... Minimum conduit size according to Code is 1". ... grabbing tools for catching hold of cables and wires. ... Connected load will be much greater as I can bring some machines out ...
    (rec.woodworking)
  • Re: Wire size for 250 distance to garage?
    ... on a 60A circuit, but, again, due to the length of the circuit, bump it up at ... Minimum conduit size according to Code is 1". ... rather than trying to pull the whole 250' run at once. ... grabbing tools for catching hold of cables and wires. ...
    (rec.woodworking)
  • Re: Wire size for 250 distance to garage?
    ... on a 60A circuit, but, again, due to the length of the circuit, bump it ... Minimum conduit size according to Code is 1". ... rather than trying to pull the whole 250' run at once. ... grabbing tools for catching hold of cables and wires. ...
    (rec.woodworking)
  • Re: Burying Coax Feedlines & Control Cables
    ... 1/2" heliax and x2 RG213 coax) plus rotators cable and Steppir cable. ... Don't direct bury the cables. ... Bury conduit and pull ...
    (rec.radio.amateur.antenna)
  • Re: Re: Re: Extending Terrestial Digital Over Cat5 to Multiple TVs/Receivers
    ... you're installing the conduit, assuming that you can't get to the conduit ... The only thing that springs to mind is the difference between the sometimes quite strenuous efforts used to pull mains cable when installing, which Cat5e won't take, compared to the expected relatively gentle pull required to unroll it out of a carefully wound box. ... Installing new cable into existing conduit can sometimes be a bit tricky depending on the size and condition of the conduit, whatever else might be in the conduit as well (ideally, nothing else should be in the same conduit as network cables) and any sharp corners or bends in the conduit. ... A 'pull rope' left in the conduit can be used to gently guide the new cable, but obviously excessive force should not be used or the inner twisted pairs may be damaged by breaking - a risk that is much higher if poor quality cable is used. ...
    (uk.tech.digital-tv)