Re: knurling woes
- From: "Jeff R" <contact.me@xxxxxxx>
- Date: Sun, 30 Oct 2005 21:08:53 +1100
"John D. Farr" <jfarr62@xxxxxxxxxxx> wrote in message
news:UIednftcOOgMHvneRVn-rw@xxxxxxxxxxxxxx
> Hello, and thanks for taking the time to read this. I have an Aloris
clone
> BXA tool post and have had much trouble knurling steel with the Type 10
> knurling tool holder. I tighten the nut on the tool post as tight as I
dare
> but when I put enough pressure to do the knurling, the tool post rotates.
Is
> there any friction stuff that I can put between the toolpost and the
> compound to fix this? Thanks, John
Are you tightening _then_ switching on, or tightening gradually as you run
the lathe in back gears?
(I assume you have the knurling wheels wet with oil...)
--
Jeff R.
.
- References:
- knurling woes
- From: John D. Farr
- knurling woes
- Prev by Date: Re: OT laptop repair
- Next by Date: OT This is useful in keeping track of digital photos. From the mighty google and it's free.
- Previous by thread: knurling woes
- Next by thread: Re: knurling woes
- Index(es):
Relevant Pages
|
