Re: Attach Rotary Table Vertically to Mini-Lathe?

Rex B writes:

> I don't believe he has enough height between carriage and spindle, even
> stripped down.

I already addressed that, saying that there is about a 0.15 inch height
difference, which would be the minimum bolt circle radius.
.

Relevant Pages

  • Re: Which would you choose?
    ... the carriage travel to the number of spindle turns. ... gears, should one not be able to achieve a more or less infinite combination ... On imperial lathes with an imperal leadscrew, ...
    (rec.crafts.metalworking)
  • Re: Thread cutting on a reversible lathe
    ... You are "essentially" correct about cutting left to right to get a left ... relationship to the spindle what ever direction it's turning. ... If you want to the carriage move TOWARDS the headstock, ...
    (rec.crafts.metalworking)
  • Re: leveling lathe
    ... This method will verify the spindle to a straight bed. ... It will not allow you to attain a straight bed, because you are only testing with carraige in a single location. ... Doesn't that method move the carriage from one end to the other, ...
    (rec.crafts.metalworking)
  • Re: leveling lathe
    ... get in the way, like gravity. ... This method will verify the spindle to a straight bed. ... Doesn't that method move the carriage from one end to the other, ...
    (rec.crafts.metalworking)
  • Re: NY Crash
    ... ice. ... Rex. ... BTW I heard on the BBC over the weekend that leaks from members of the IPCC ... been saying all along. ...
    (uk.local.cumbria)