Re: Is A Used Surface Plate Good?


"Too_Many_Tools" <too_many_tools@xxxxxxxxx> wrote in message
news:1125462415.016020.174870@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> A used surface plate just showed up on my doorstep...amazing what
> follows me home sometimes. :<)
>
> This surface plate is a Rahn 34" x 36" black granite with two ledges.
>
> So, how does one decide if a surface plate is "good"?
>
> If it is "bad", how do you decide whether or not it is worth
> refurbishing? How much does it cost to refurbish a surface plate and
> how do they do it?
>
> And if it is not worth refurbishing, what have you used an old surface
> plate for? I've already got a gravestone. ;<)
>
> Thanks for any suggestions, comments or wisecracks.
>
> TMT
>

While I don't recall the details, it used to be routine for a roving service
to refinish and calibrate surface plates. They worked through local
supply houses, with advance notice. I've not seen it done, so I can't
comment on the procedure. One thing is for sure------shipping it two
directions to have it done, especially with today's high fuel prices, would
be a bad deal.

Unless yours has been very poorly used/handled, and unless you intend to use
it for QC, I wouldn't lose much sleep over it. Put it to use in your shop,
providing a wooden cover for it so it doesn't get banged up unnecessarily.
They're super nice for laying out with a height gage, or even inspecting
your work. Even if it was out a thou, you'd be unlikely to know, or have it
affect you negatively.

Make sure it's level, so you don't chase things that you lay on the surface.
It's not uncommon to use drill blanks or other round objects in the process
of inspecting or making setups. A rigid steel bench with leveling bolts in
the legs is a good idea. Once you've had one, you'll wonder how you got
along without it.

Harold


.

Relevant Pages

  • Re: Is A Used Surface Plate Good?
    ... And if it is not worth refurbishing, what have you used an old surface ... be a very bad surface plate to be worse than most anything else you'd be doing layout on. ... It's not uncommon to use drill blanks or other round objects in the process of inspecting or making setups. ...
    (rec.crafts.metalworking)
  • Re: Is A Used Surface Plate Good?
    ... My wife was thinking of a number of them in the kitchen. ... thick enough to use and just under the way to heavy. ... How much does it cost to refurbish a surface plate and how do they do it? ... And if it is not worth refurbishing, what have you used an old surface ...
    (rec.crafts.metalworking)
  • Re: Is A Used Surface Plate Good?
    ... > This surface plate is a Rahn 34" x 36" black granite with two ledges. ... > And if it is not worth refurbishing, what have you used an old surface ... surface plate to whatever flatness you need for a very reasonable price. ...
    (rec.crafts.metalworking)
  • Re: Is A Used Surface Plate Good?
    ... > This surface plate is a Rahn 34" x 36" black granite with two ledges. ... standard you have for "straight" and try to find any gaps between it and ... > And if it is not worth refurbishing, what have you used an old surface ... there's any visible gaps, get out the feeler gages and see how bad they ...
    (rec.crafts.metalworking)
  • Re: Is A Used Surface Plate Good?
    ... > This surface plate is a Rahn 34" x 36" black granite with two ledges. ... > And if it is not worth refurbishing, what have you used an old surface ...
    (rec.crafts.metalworking)