Re: Keg pour rates

On 30 Mar 2006 15:37:56 -0800, <Sammus187@xxxxxxxxx> wrote:
Yeah I had done that numerous times, well I disconnected the gas
completely, vented all pressure in both kegs and in the gas line, then
re hooked it up then set the reg to 12psi. This got done a few times in
the course of my investigation of the problem :)

When I took the beer post connector off the slow-pouring keg the seal
was sitting a bit funny, rather than put the post back on I just
swapped the 2 and now they both pour fine...I guess it was the seal, it
doesnt seem likely though, it really wasn't sitting that strangly, i
just thought it didn't looked like it was a picture perfect example :P

Any, prob fixed now

It's possible that the poppet was just stuck and wouldn't open all the way
when you put the QD on it.


John.
.