Re: Timing problem!!Would appreciate help

You do know that the piston only fires evey other time it's at the top,
right? Has to be on the compression stroke. Stinck your finger in the
spark plug hole, or watch for the intake valve closing. Or just spin it
around once and try again.

"John Gaquin" <john.gaquin@xxxxxxxxxxx> wrote in message
news:6pOdnXlv4bHNh0vZnZ2dnUVZ_umdnZ2d@xxxxxxxxxxxxxx

"Lawson Barkhouse" <jlhouse@xxxxxxxxxxxxxxx> wrote in message

I have just repowered my 28Wellcraft but cannot get one motor to run....
(We used the firing order and had the piston in place on the left bank
(#1) but without success.

Does that engine run in reverse rotation? Did you reverse the firing
order?



.

Relevant Pages

  • Re: E36 needs new brake pads . . .
    ... level after you have pushed each piston back in. ... big-bore drinking straw with your finger over the end like a pipette ...
    (alt.autos.bmw)
  • Re: Valve lash question
    ... the piston has to be at TDC anyways to make the ... adjustment. ... 1,3,4,2 is the firing order, it makes sense to do it this ...
    (rec.autos.makers.honda)
  • Re: Bikes are dangerous and injure you
    ... not a whinge because you've bent your finger enough to make it ... swell up a bit. ... Not likely 'cos I've decided to replace the piston in the KTM. ...
    (uk.rec.motorcycles)
  • Re: Timing problem!!Would appreciate help
    ... has twin 350s).There is gas going to the carburator and spark to the ... plugs.We used the firing order and had the piston in place on the left bank ...
    (rec.boats)